Jiangsu Lionkin Industrial Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Wang Henry
  • Company Name : Jiangsu Lionkin Industrial Co., Ltd.
  • Tel : 86-515-88363921
  • Fax : 86-515-88368389
  • Address : Jiangsu,Yancheng,12 East Yanhe Rd.,
  • Country/Region : China
  • Zip : 224005

200KW Wind Turbine Generator

200KW Wind Turbine Generator
Product Detailed
this machine is from china , we have sold them to many countries

The Characteristic of SUT200Wind Turbine

SUT200 which adopts three-blades horizontal axis feather is the 200KW grid connected wind turbine. The use ratio of wind turbine is highly improved by using variable-speed constant frequency, variable-speed feather and advanced control strategy ;

The use of sophisticated computer and communications technology which has complex security control strategies and fault self-diagnostic function is to reduce the amount of routine maintenance;

The wind turbine can be long-term normal operation on the island and in the desert by strengthening the anti-interference ability and using the design to adapt bad environment, especially anti-sand and salt spray corrosion resistance.

The design of anti-low-temperature can make the wind turbine run stably in the cold area;

The unique feather structure can make the power output smoothly, lower the shake of torque and nacelle, optimize the output power, lower the noise, steady the output power of the generator by controlling the pitch angle ;

Control System:

Independently developed products WE400 controller is adopted in the control system. It includes I/O module, light conversion module, counting module, communication module, encoder module, power monitor measuring module, human-computer interface. Its character is high speed, easy debugging and mass storage. Industrial Ethernet bus and embedded operating system; Protection unit is added to make the wind turbine shut down to the protect state automatically when lack of power grid phase, under voltage, overvoltage or other failures.

Security System:

UPS back source: 1. Power cut and blade holder;

2. Power supply to the control system;

Lightning protection, Inrush protection and grid monitoring;

Hardware security chain protection, wind turbine shutdown automatically to protect;

Anti-salt and anti-corrosion treatment of the System is suitable for coastal areas and islands;

Power balance control is very important for the security of small-capacity diesel power grid network;

Variable-pitch System:

Electrical variable-pitch System, an independent controller;

Two sets of sensors;

Two-feedback control: speed and angle;

Maximum Speed: 10 degree/sec

Maximum time of full-speed close pitch: 9 sec

Angle range:-5~95degree

Software System:

32-bit CPU, embedded operating system;

Filedbus: Industrial Ethernet and Can bus

Modularization Design 

Human-Machine Interface: 10-inch LCD touch screen, easy to operate;

Fault diagnosis;

Historical records, data statistics;

Grid connected technology:

Flicker : Load cannot suddenly changed by variable-pitch control;

Resonance: the constant switching frequency of IGBT inverter is 2300Hz.The system has high and constant switching frequency, little filtering and small resonance proportion(THD is 1%).

Switching process: It occurs in the process of loading of the DC intermediate circuit.

The capacitors of DC intermediate circuit is loaded through a resistor. The maximum current value that produced is 1% of rated current.

Access Grid: Generator and grid synchronized smoothly, torque and power adjust slowly from 0;

Maintenance and Installation: 

Modularization Design: Design modularly, it is easy to install;

Connectors: Air connector is adopted in sensor and cable connection, it iseasy to installe and maintain;

Unattended: Fault self-diagnosis, if it is recoverable, the system will automatically start within the set time to achieve the unattended;

200KW Wind Turbine Generator



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.