QAY25 truck crane

QAY25 All Terrain Crane adopts 4-section box type powered telescoping, with all-round hexagonal boom profile, made of high-tensi

QAY25 All Terrain Crane adopts 4-section box type powered telescoping, with all-round hexagonal boom profile, made of high-tensile structural steel, with longitudinal reinforcement for improving partial stability of boom lower plate, better lateral rigidity for boom. 5 sheaves at boom head, the 2nd, 3rd sections and the top one synchronously telescope, telescoping system contains double-action cylinder and wire ropes, and with holding valve fitted in the cylinder. 2-axle chassis with environment engine, all axle drive, all wheel steering and crab walk possible, equipped with advanced hydro-pneumatic suspension and off-road tires, suitable for variable complicated ground conditions. The vehicle can travel on various rough road, operate 360°full circle, and also on mid-extended outrigger or on tires, and travel with a suspended load.

Classification	Item			Unit	Parameter
Outline dimension	Overall length			mm	10700
	Overall width			mm	≤2500
	Overall height			mm	3550
	Wheel base			mm	4000
	Track	Front wheels		mm	2110
		Rear wheels		mm	2110
	Front overhang			mm	2930
	Rear overhang			mm	1540
Mass	Total mass in travel state			kg	25200
	Axle load	Front axle		kg	12600
		Rear axle		kg	12600
Power	Engine model				D6114ZLQ2B
	Engine max. power			kW/(r/min)	184/(2200r/min)
	Engine max. torque			N·m/(r/min)	958/(1400r/min)
	Engine stable idle speed			r/min	650700
Travel performance	Travel speed	Max. travel speed		km/h	≥70
		Min. stable travel speed		km/h	≤2
	Turning diameter	Min. turning diameter	Front axle steering	m	≤20
			All axles steering	m	≤14
		turning dia. at boom tip	Front axle steering	m	≤24.9
			All axles steering	m	≤18.1
	Min. Ground clearance			mm	≥360
	Approach angle				≥21°
	Departure angle				≥20°
	Braking distance (at 30KM/h with full load)			m	≤10
	Max. Grade-ability				≥58%
	Crane exterior noise at acceleration			dBA	≤88
	Fuel consumption for 100km			L	40
Others	Chassis model				XZA25
	Tyre spec.				14.00-25
	No. of tyre (excluding spare tyre)				4
	Tyre pressure			MPa	1
2Technical Data for Lifting Operation
Classificatory	Item			Unit	Parameter
Main performance	Max. total rated lifting capacity			t	25
	Min. rated working radius			m	3
	Turning radius at turntable tail			m	≤3.32
	Max. load moment	Base boom		kN·m	948
					(21.5t×4.5m)
		Fully extended boom		kN·m	416
					(2.5t×7m)
		Fully extended boom + jib		kN·m	310
					(2.15t×14.7m)
	Outrigger span	Longitudinal		m	6.325
		Lateral		m	6.2
	Hoist height	Base boom		m	≥8.8
		Fully extended boom		m	≥28.2
		Fully extended boom + jib		m	≥36.6
	Boom length	Base boom		m	8.9
		Fully extended boom		m	28
		Fully extended boom + jib		m	28+8.15
	Jib offset				0°15°30°
Working speed	Boom raising time			s	≤30
	Boom full extension time			s	≤40
	Max. swing speed			r/min	≤2.5
	Outrigger telescoping time	Outrigger beam	Extension at one time	s	≤25
			Retraction at one time	s	≤18
		Outrigger jack	Extension at one time	s	≤25
			Retraction at one time	s	≤18
	Hoists peed (single rope)	Main winch		m/min	≥140
		Aux. winch		m/min	≥140
Noise limit	Crane exterior noise			dB (A)	≤118
	At seated position			dB (A)	≤90
Note: All specifications on our web-site are subject to technical modifications without notice.

QAY25 truck crane